Quality Valve Inc.

Quality Valve Inc. logo
E-mail info@qualityvalves.com
For Address Info, click here

We accept:

HAND VALVES
Features: AGCO hand valves are suitable for all instrument isolation duties, giving you bubble tight shut-off time after time. With metal or soft seals for gas, vapor or liquid applications, rated up to 10,000 psig (690 barg) and available ina range of standard and exotic materials there is a hand valve for even the most severe service.

Specifications:

Materials	CS, SS, Monel®, Duplex and other exotic materials
Seats	Metal and Soft
Connections	1/8" to 2" threaded, welded and flanged also available
Orifice Sizes	1/8" (3mm), 3/16" (4.7mm), 1/4" (6.4mm), 3/8" (9.5mm), 5/8: (16mm), 1-1/4" (31.8mm)
Pressure (max)	10,000 psig (690 barg)
Temperature (max)	1,000° F (538° C)

GUAGE VALVES
Features: AGCO guage valves include multi-port and block and bleed styles suitable for guage isolation, calibration and venting with a choice of either globe pattern or through-bore designs. A wide choice of end connections and comprehensive range of standard guage accessories allows complete flexibility for individual installations.

Specifications:

Materials	CS, SS, Monel®, Duplex and other exotic materials
Seats	Metal and Soft
Connections	1/4" to 3/4" threaded, welded and flanged also available
Orifice Sizes	1/8" (3mm), 3/16" (4.7mm), 1/4" (6.4mm), 3/8" (9.5mm)
Pressure (max)	10,000 psig (690 barg)
Temperature (max)	1,000° F (538° C)

PRIMARY ISOLATION ROOT VALVES
Features: M5K root valves are available in two standard designs, multi-port with three instrument/vent connections and also a unique dual-port design for primary isolation on gauge or orifice tap applications. All root valves have a four bolt outside screw and yoke (OS&Y) bonnet design for added strength and reliability and comply with ANSI B31.3 and ANSI B31.1 codes.

Specifications:

Materials	CS, SS, and other exotic materials
Seats	Metal, Soft and Stellited
Connections	1/2" to 3/4" threaded, welded and flanged also available
Orifice Sizes	1/8" (3mm), 3/16" (4.7mm), 1/4" (6.4mm), 3/8" (9.5mm)
Pressure (max)	6,000 psig (414 barg)
Temperature (max)	1,000° F (538° C)

PRESSURE MANIFOLDS
Features: The range of pressure manifolds is suitable for all types of static pressure instruments from gauges to 'smart' pressure transmitters. Available for direct or remote mounting, the pressure manifolds enable isolation, calibration and venting in a single unit.

Specifications:

Materials	CS, SS, Monel®, Duplex and other exotic materials
Seats	Metal and Soft
Connections	1/4" to 3/4" threaded,flanged, also suitable for direct mounting
Pressure (max)	6,000 psig (414 barg)
Temperature (max)	1,000° F (538° C)

FLOW MANIFOLDS
Features: AGCO has the largest and most innovative range of 'differential pressure' flow manifolds available in the world with models available for every kind of D/P instrument. These include conventional three and five valve manifolds as well as purpose designed models for special applications.

Specifications:

Materials	CS, SS, Monel®, Duplex and other exotic materials
Seats	Metal and Soft
Instrument Connections	1/4" to 1/2" threaded and suitable for direct instrument mounting
Process Connections	1/4" to 1/2" threaded and suitable for instrument flanges
Pressure (max)	6,000 psig (414 barg)
Temperature (max)	1,000° F (538° C)

LEVEL MANIFOLDS
Features: The M4 manifold is also available for liquid level service (M4TL). With two valves, one for the level 'sense' line and one for the wet or dry leg, the M4TL mounts directly onto a D/P Transmitter.

Specifications:

Materials	CS, SS
Seats	Metal
Instrument Connections	Flanged for direct mounting
Process Connections	1/2" threaded
Pressure (max)	6,000 psig (414 barg)
Temperature (max)	1,000° F (538° C)

KEYBLOK MANIFOLDS
Features: The range of primary isolation double block and bleed valves meets both instrument and piping engineers' specifications, offering significant savings on space, weight, installation and cost. Suitable for line isolation, sample connectors and chemical injection service, KEYBLOK manifolds use ball valves, outside screw and yoke (OS&Y) bonnets and threaded bonnet instrument valves, and are available with a full range of threaded and flanged connections up to API 10K.

Specifications:

Materials	CS, SS, Duplex and other exotic materials
Seats	Metal and Soft, firesafe and standard
Connections	Threaded, flanged 1/2" to 2" ANSI, DIN and API 10K, other specialist bolted connections also available
Orifice sizes	0.39" (10mm) - Ball Valves 1/4" (6.4mm) - OS&Y Valve Bonnet 3/16" (4.7mm) - Instrument Valve Bonnet
Pressure (max)	10,000 psig (690 barg)
Temperature (max)	1,000° F (538° C)

SLIMLINE MONOFLANGE
Features: The Monoflange manifolds can be mounted directly onto vertical or horizontal flanged connections, allowing a guage to be keptin an upright position. Suitable for both primary isolation (double block and bleed) and instrument (block and bleed) duties, Monoflange provides isolation, venting and instrument mounting in a single compact unit. The designs incorporate safety features that limit vibration and reduce the overall height of a gauge installation.

Specifications:

Materials	CS, SS, Duplex and other exotic materials
Seats	Metal
Instrument Connections	Threaded, 360° swivel connection and flanged
Process Connections	Flanged 1/2" to 2" ANSI, DIN and API 10K
Pressure (max)	10,000 psig (690 barg)
Temperature (max)	1,000° F (538° C)

BELLOWS SEALED VALVES AND MANIFOLDS
Features: A full range of bellows sealed hand valves, gauge valves and manifolds stuitable for pressure, flow and level is available for critical service and for applications where 'zero stem leakage' is permitted to the atmosphere. All the bellows, as well as the assembled valves, are helium leak tested prior to shipment to ensure complete integrity.

Specifications:

Materials	SS
Seats	Metal
Bellows	SS and Inconel®
Connections	Threaded and welded
Pressure (max)	2,650 psig (182 barg)
Temperature (max)	850° F (454° C)

INSTRUMENT PROTECTION SYSTEMS
Features: Anderson, Greenwood instrument protection systems provide a strong weatherproof barrier for every type of instrument installation, both on and offshore, and have been installed in some of the harshest industrial climates in the world. Instrument enclosures prevent exposure to harmful UV rays and can be supplied for temperatures from -70° F to +176° F [-70° C to +80° C]. With a range of three standard sizes of enclosures and a purpose designed range of integrated manifolds, heaters and accessories, this unique system sets the standard in intrument protection.

Specifications:

Enclosures	Manufactured from tough fire retardant GRP, weatherproof to IP66, anti-static and insulated options available.
Manifolds	A complete range of integral base and back mounted 2, 3, and 5 valve manifolds suitable for liquid and gas service are available.

MODULAR MOUNTING SYSTEM
Features: The Modular Mounting System for instrument impulse line installations has been developed in conjunction with Shell International (SIPM) and has particular applications in the petrochemical and refining industries. Based on a standard mounting plate, it allows components to be either pre-assembled in the workshop or assembled at a later stage providing maximum flexibility without compromising quality and safety. The Modular Mounting System has a full range of manifolds for differential pressure, pressure and gauge applications and accessories including GRP enclosures, heating blocks, seal pots, purge blocks and test connection boxes.

ACCU-MOUNT SYSTEM
Features: Anderson, Greenwood's ACCU-Mount^TM system is designed for the installation of instruments on fiscal metering applications. The system provides close coupling to the orifice tap and full porting to reduce any possible measurement inaccuracy through induced square root error. The system also has a range of other components to ensure the complete installation has full porting and the flexibility for single or multiple mouting of instruments.

Back to Products