E-mail info@qualityvalves.com
For Address Info, click here
We
accept:
  
|
| 
Click here to buy Key-Tite and Key
Graphite Paste online at keytite.com
 |
KEY-TITE®
Features: This viscous sealant cannot be equaled for leakproof sealing
of threaded, flanged and gasket joints. Use Key-Tite in flow lines for hot and
cold water, aqueous solutions, low pressure steam slurries, natural and manufactured
gases, compressed air, filled products*, dilute acids and caustics, and alcohols.
Characteristics:
| Viscosity
strokes at 77º |
650-750 |
| Toxicity |
None |
| Metal Adhesion |
Excellent |
| Stability |
Good |
| Corrosion-copper
strip method |
None |
| Free alkali-maximum |
0.5% |
| Moisture-maximum |
0.2% |
*Approved by U.S. Department of Agriculture for
meat and poultry. Industry-approved for most food and processing applications;
however, for specific services, recommendation should be obtained from the factory.
|
Click here to buy Key-Tite and Key
Graphite Paste online at keytite.com |
 |
KEY GRAPHITE PASTE
Features: This
viscous compound is industry's finest for leakproof sealing of threaded, flanged
and gasket joints in flow lines for gasoline and other fluids, solvents, including
chlorinated (Trichloroethylene) and aromatic and vegetable oils, ethers, esters,
ketones, alcohols, glycerin, glycois, compressed air, high pressure steam and
strong acids.
Characteristics:
| Viscosity strokes
at 77º |
650-750 |
| Toxicity |
None |
| Metal Adhesion |
Good |
| Stability |
Good |
| Corrosion-copper
strip method |
None |
| Moisture-maximum |
16% |
|
Click here to buy Key-Tite and Key
Graphite Paste online at keytite.com |
 |
KEY RED-D-MIX
Features: Key
Red-D-Mix is a black viscous thread lubricant and sealant recommended for use
at extreme
Characteristics:
| Viscosity strokes
at 77º |
650-750 |
| Toxicity |
None |
| Metal Adhesion |
Good |
| Stability |
Good |
| Corrosion-copper
strip method |
None |
| Free alkali-maximum |
Nil |
| Moisture |
Nil |
|
 |
KEY ALUMINUM JOINT PASTE
Features: Key Aluminum Joint Paste is a viscous sealant used on frequently broken-out
joints where graphite-type sealants are considered unsatisfactory from the standpoint
of cleanliness. (Not for use with strong acids, caustics, petroleum products or
solvents.)
Characteristics:
| Viscosity strokes
at 77º |
650-750 |
| Toxicity |
None |
| Metal Adhesion |
Good |
| Stability |
Good |
| Corrosion-copper
strip method |
None |
| Free alkali-maximum |
Nil |
| Moisture |
Nil |
|
 |
KEY ABSO-LUTE has been discontinued
|
Click
Here for Key-Tite and Key Graphite Paste
Lading Guide
Key-Tite MSDS (PDF format)
Key Graphite Paste MSDS (PDF format)
Back
to Products
|
